⚡ Quick AI Summary & Diagnostic Verdict
When a washing machine stops mid-cycle full of water and refuses to spin, the control board has triggered a drain-timeout safety lock (LG Code OE, Samsung Code 5C / nd, Bosch Code E18, or Whirlpool Code F9E1). In 85% of Miami service calls, this is caused by either an obstructed coin trap or a burned-out 120V magnetic drain pump impeller ($165–$265).
1. Brand-by-Brand Washer Drain & Spin Error Code Table
| Brand & Code | Trigger Condition | Primary Mechanical Failure | Miami Repair Cost |
|---|---|---|---|
| LG — OE | Water stays after 10 min drain | Failed direct-drive drain pump motor (16–22 Ohms) or clogged filter. | $165 – $255 |
| Samsung — 5C / 5E | Pressure switch still reads full | Broken pump impeller blades or sock lodged in tub-to-pump bellows. | $165 – $260 |
| Bosch / Miele — E18 / F11 | Drain timeout > 6 minutes | Foreign object locking impeller or blocked high-loop standpipe check valve. | $175 – $275 |
| Whirlpool — F9E1 | Long drain > 8 minutes | Weak drain pump motor or kinked internal drain hose assembly. | $160 – $250 |
Frequently Asked Questions
Can I open my front-load washer door if it stops with standing water?
No! Opening the main door while water is above the lower rim will flood 8–12 gallons onto your laundry room floor. Instead, open the small bottom-front access panel and use the black emergency drain hose to empty water into a shallow pan first.
How much does washer drain pump replacement cost in Miami?
Complete drain pump assembly replacement including safe wet-vac water extraction typically ranges from $165 to $265 across Miami-Dade County.